Page 2
14mm Mini Spanner M5 Allen Key M8 x 16mm Bolt M8 Nut Center Leg Sofa with Armrest ADJUSTING ARMREST POSITIONS Metal Cap Plastic Cap Sofa Cover 1. Standing in front of the unit, lift the armrest to the desired position and secure it in place by releasing to the sound of a click.
Page 3
Converting to Bed ASSEMBLY INSTRUCTIONS From sofa or lounge position, lift backrest all the way upwards until the last click is heard which unlocks the mechanism. Carefully return to a flat position. CAUTION: At least two adults are required to safely performing this task.
Page 4
Place sofa body as shown below. OPERATING YOUR UNIT Insert both connecting bars to bottom metal frame (left sofa body), until pre-drilled Converting to Sofa holes are aligned. Next secure the metal frame and connecting bar with two bolts at Standing at the side of the unit (from bed position), lift backrest to the desired position each side.
Page 5
Repeat Step 7 for locating the pegs on the seat of sofa. Finally, stretch and pull down the rear, seat body, and front cover evenly before securing the velcro strip to the bottom of the backrest Align the center leg onto the pre-drilled holes located on the metal frams and and seat base.
Page 6
Lift the armrest to the desired position as shwon below (refer page 9 “Operating Your Carefully lift and turn assembled unit onto its legs. Lift backrest to sofa position as Unit”). Now start to slip on the armrest cover as shown below.
Need help?
Do you have a question about the SOFA and is the answer not in the manual?
Questions and answers