Advertisement
EN
'(6&5,37,21 $1' $66(0%/<
M
- Extension (2 pcs)
N
- Double bend Issa
O
- PVC round brush
P
- PVC brush
Q
- Flat lance PVC
R
- PVC adaptor
S
- Dust tool Issa
T
- Carpet tool Issa
U
- Wet tool Issa
V - Upholstery tool
'5< &/($1,1*
- Insert the cloth filter % in the tank & (fig. 1); if necessary
remove the detergent tank +.
- Hook up the motor head $ on the tank & and lock it up with
the hooks (fig. 3).
- Fix the flexible hose * into the suction inlet ) (fig 4).
- Fix, at the end of the flexible hose, the extension 0 or 1
(fig. 5).
- Fix the most suitable accessory (see figure).
- Activate suction by pressing the red switch, after having
connected the machine to the proper electric grid (fig. 6).
- Use-example with 39& brush 3 (fig. 7).
- Use example with flat lance 4 (fig. 8).
- Use example with round brush 2 (fig. 9).
- Use example with dust tool 6 (fig. 10).
- Use example with carpet tool 7 (fig. 11).
- If a paper bag is provided, insert it in the tank on the
deflector (fig. 16).
:(7 &/($1,1*
- Remove the cloth filter % from tank & (fig. 2).
- Set in the detergent-tank + in the tank & (excepted for
models with external tank).
- Hook up the motor head $ on tank & and lock it up with the
hooks (fig. 3).
- Fix the flexible hose * in the suction inlet ) (fig. 4).
- Fix, at the end of flexible hose *, the extension 0 or 1 (fig.
5).
- Connect the wet tool 8 (see other page)
- Activate suction by pressing the red switch, after having
connected the machine to the proper electric grid (fig. 6).
- Example of use with wet tool 8 (fig. 12).
,1-(&7,21(;75$&7,21 :$6+,1* 6<67(0
- Remove the cloth filter % from the tank & (fig. 2).
- Set in the detergent tank + in the tank (excepted models
with external tank).
- Put the detergent product into the external tank ' or into the
tank +
- Hooks up the motor head $ on the tank & and locks it up
with the two hooks (fig. 3).
- Fix the flexible hose * into the suction inlet ) (fig. 4).
- At the end of the flexible hose fix the proper accessory (9
: =)
- Set the hydrolytic hose into the quick coupling on the head
(marked "outlet" for models with external tank) at one side,
and to the quick coupling connector on the accessory (fig.
17).
- Activate the motor by pressing the red switch, and the pump
by pressing the green one, after having connected the
- machine to the proper electric grid (fig. 6).
- By pressing the cock handspike, pull towards you the
accessory laying on the surface to wash (fig. 14).
- At the end of the stroke release the cock handspike and,
after having lifted and removed the accessory (fig. 15),
repeat the previous operation.
- Proceed in the same way witn me upholstery tool (fig. 13).
,16758&7,216 72 %( 675,&7/< )2//2:('
- Components used in packaging (if. plastic bags) can be
dangerous keep away from children and animals.
- The use of this machine for anything not specified in this
manual may be dangerous and must be avoided.
- The suction nozzle should be kept away from the body,
especially delicate areas such as the eyes, ears and mouth.
- The equipment should be correctly assembled before use.
- Ensure that power sockets used are correct for the
machine.
- Check the voltage indicated on the rating plate is the same
as the supply voltage.
- These machines are not designed for picking up health
endangering dusts or inflammable/explosive substances.
- Never carry out any maintenance on the machine without
first disconnecting from the mains supply, if the machine is
to be left unattended the supply should also be terminated.
- The mains supply cable should not be used to pull or lift the
machine.
- The machine should never be emersed in water or a
pressure jet of water used for cleaning.
- Periodically examine the mains cable and machine for
damage. If any damage is round contact your service centre
for repair.
- Should extension cables be used, ensure that the cable
rating is suitable for use with the equipment. Do not the
cable coiled as this coularesult in a voltage drop or
overheating. Keep dry at all times.
-
The equipment should not be used to pick up water from
containers lavatories, tubs, etc.
-
Never leave the equipment unattended whilst in use.
-
Ensure that the float pos. Y all is not damaged or obstructed
by anything that may stop it from rising. The floats function
is to stop the suction when the tank is full or if the machine
should overturn accidentally.
-
If the equipment should overturn it is recommended that the
machine should be stood up before switching off.
-
If foam/liquid should come from the machine exhaust switch
off immediately.
-
Aggressive solvents or detergents should not be used.
-
Keep jet directed away from all electrical switches and
connections.
-
Never run the pump without liquid as this may result in
damage.
-
When cleaning is finished, flush out the pump with 1/2 litre
of clean water and run until empty.
-
When all work is completed and the pump is off the
pressure must be discharged by depressing the valve lever.
-
Service and repairs must be carried out by qualified
personnel only.
Replacement parts for the machine must be manufacturer's
original spare parts only.
-
The manufacturer cannot be held responsible for any
damage/injury caused to persons or property because of
the incorrect use of the machine due to procedures being
used which are not specified in this instruction manual.
Advertisement
