Technical Data; Ecology - Environment Protection - Optimum RK-1220 Operating Instructions Manual

HOW TO ASSEMBLE AND DISASSEMBLE
1. P lace the juicer container onto the motor base. Make sure to
install the spout to the juice outlet.
2. I nstall the filter into the juicer container. Make sure to press
it as far as it can go.
3. Place back the top cover.
4. L ock the two safety latches on both sides of the unit.
5. A fter the above mentioned five steps, the unit is ready for
use now. Connect it to power source and turn on the unit. If it
runs normally, you can start to make the juicer.
To disassemble the unit for cleaning follow the steps in a
reverse order
HOW TO USE THE JUICER EXTRACTOR
1. W ash fruits & vegetables cleanly(peel skin when necessary),
cut them into a proper blocks or pieces .Place a juice cup or
other container right under the juice outlet.
2. C onnect the unit to power source and operate the control
switch.
3. P lace foods in the food chute and press lightly with pusher,
Do not use your fingers as pusher. Extracted juice will run
out from the juice outlet into the juice cup. If the dregs
container is full, Unplug and clean it out.
4. A fter juicing, turn the switch to "0" , then unplug it.
Completely clean all parts before you store it.
CLEANING
1. It is recommended to clean the juicer immediately after use.
2. D o not use abrasive agents, cleaning powder, acetone,
alcohol etc. to clean the juicer.
3. Not dishwasher-safe.
4. The body of the juicer cannot be put in water.
5. Clean the device with a damp cloth.
6. O ther components can be washed in warm water with a little
washing-up liquid.
7. T he filter is made of a very delicate material. For this reason,
it should be handled with care when washing.
8. W ash the cutting blade carefully because it is very sharp.
Use a soft brush to clean metal parts, especially sharp knives
and discs.

TECHNICAL DATA

Power Supply: 220-240 V~, 50/60 Hz
Power: 200 W

ECOLOGY - ENVIRONMENT PROTECTION

The „crossed-out wheeled bin" symbol placed on
electrical equipment or packaging indicates that
the device may not be treated as general household
waste and should not be disposed of in dedicated containers.
Unnecessary or used electrical equipment should be delivered
to specially designated collection points, organized by the local
public administration, intended for the delivery of electrical
equipment subject to disposal.
In this way, each household contributes to the reduction of
possible negative effects affecting the natural environment and
allows you to recover the materials that make up the product.
℮
Weight: 1.70kg
9