Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ekwb D-RGB
Summary of Contents for ekwb D-RGB
- Page 1 EK-Loop D-RGB LED Magnetic Strip USER GUIDE...
- Page 2 Before you start using this product, please follow these basic guidelines: Carefully read the manual before beginning with the installation process. Product should not be used with 12V headers as that will damage the diodes, they should be powered exclusively by 5V header.
- Page 3 TABLE OF CONTENTS TEHNICAL SPECIFICATIONS INSTALLING THE D-RGB LED STRIP ATTACHING THE WIRE HARNESS CONNECTING THE LED STRIP SUPPORT AND SERVICE SOCIAL MEDIA - 3 -...
- Page 4 TEHNICAL SPECIFICATIONS - Connection type: 3-pin (+5V, D, Blocked, Ground) LED STRIP: - Rated voltage: 5V DC - Number of LEDs: 81 (21/strip, 52LED/m density) - Strip length: 4 x 400 mm 400 mm - Strip width: 10 mm - Cable length: 2x 500 mm, 4x 150 mm wire extender - Strip thickness: 2.6 –...
- Page 5 INSTALLING THE D-RGB LED STRIP The EK-Loop D-RGB LED Magnetic strip contains 21 LEDs and 500 mm wire harness. The wire extenders (150 mm) allow you to LED STRIP connect more LED strips to customize your PC LED lighting (shown in the image).
- Page 6 CONNECTING THE LED STRIP Plug the 3-pin connector of the Wire Harness to the D-RGB HEADER on the motherboard. The LED will work if the pin layout on the header is as follows: +5V, Digital, Empty, Ground. D-RGB HEADER RGB HEADER...
- Page 7 SUPPORT AND SERVICE In case you need assistance or wish to order spare parts, please contact: https://www.ekwb.com/customer-support/ EKWB d.o.o. Pod lipami 18 1218 Komenda Slovenia – EU SOCIAL MEDIA EKWaterBlocks @EKWaterBlocks ekwaterblocks EKWBofficial ekwaterblocks...
Need help?
Do you have a question about the D-RGB and is the answer not in the manual?
Questions and answers