Download Print this page
Tamarack Technologies INFINITY 1100 Cool & Quiet Product Manual & Installation Manual

Tamarack Technologies INFINITY 1100 Cool & Quiet Product Manual & Installation Manual

Advertisement

Quick Links

INFINITY 1100 Cool & Quiet
PRODUCT MANUAL & INSTALLATION GUIDE
In the Box:
One (1) Infinity Cool & Quiet Fan
One (1) Transition Duct
One (1) Interior Grille
Six (6) Feet of 10" Insulated Duct
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING:
·Use this unit in the manner intended by the manufacturer. If you have any questions, contact
the manufacturer.
·Before servicing or cleaning unit, switch power off at service panel and lock service panel to
prevent power from being switched on accidentally. When the service disconnecting cannot be
locked, securely fasten a prominent warning device, such as a tag, to the service panel.
·When cutting or drilling into wall or ceiling, do not damage electrical wiring or other hidden
utilities.
·Never place a switch where it can be reached from a tub or shower.
·Do not use this fan over a tub or shower.
·Do not use this fan over cooking appliances.
CAUTION: For General Ventilation Use Only. Do Not Use To Exhaust Hazardous Or Explosive Materials And Vapors
CAUTION: This unit has an unguarded impeller. Do Not Use in Locations Readily Accessible to People or Animals.
READ AND SAVE THESE INSTRUCTIONS
Serial Number
Date of Purchase
Place of Purchase
One (1) Hanger Assembly consisting of:
Two (2) Bracket/Brace 5"
Four (4) Screw 12 x 1 1/2"
Four (4) Screw ¼-20 x 3/4"
Four (4) Nut ¼-20 with Nylon Insert
Twelve (12) Washer, Flat 1/4"
320 Main Street / Buzzards Bay, MA 02532
508-759-4660 / 800-222-5932 / Fax 508-759-6001
______________________
______________________
______________________

Advertisement

loading

Summary of Contents for Tamarack Technologies INFINITY 1100 Cool & Quiet

  • Page 1 INFINITY 1100 Cool & Quiet PRODUCT MANUAL & INSTALLATION GUIDE Serial Number ______________________ Date of Purchase ______________________ Place of Purchase ______________________ In the Box: One (1) Hanger Assembly consisting of: Two (2) Bracket/Brace 5" One (1) Infinity Cool & Quiet Fan Four (4) Screw 12 x 1 1/2"...
  • Page 2 The Best Location for the Infinity1100 CQ When selecting fan mounting location, consider the following: · Mounting the fan as far as possible from the interior air intake or exhaust points will minimize fan operating noise from being transmitted back through the duct-work. ·...
  • Page 3 5) Bend the duct at a gentle angle, avoiding a sharp 90 degree corner, and slide the duct collar over the transition duct. Make sure to maintain the 10” diameter of the duct throughout the bend to ensure proper airflow. Connect the duct to the inlet collar of the fan. 6) Plug the power cord into a 115 Volt switched outlet that has been wired to local codes and standards.
  • Page 4 If, within the period of three years from the date of purchase, The INFINITY 1100 CQ (the Product) is defective or malfunctions in normal home use, Tamarack Technologies, Inc. will repair or replace the Product, at its discretion. Customer is responsible for shipping charges.