Table of Contents
Advertisement
Quick Links
Wi-Fi/RF Control Set Up Instructions – Companion Manual for the GHOST HV3400 Model WcR38/WcR50
Devices that must be present to control the Wi-Fi fan
•
An active 2.4GHz b/g/n wireless home network (Not compatible with 5.0GHz)
•
A Smart Device. You may also use Alexa or Google Home and a smart device to control the fan without the need
to log in to regain control each time.
•
EWelink app is used to operate the fan by providing the wireless network information to the Wi-Fi Control.
Compatible smart devices
•
A smart phone or tablet that has access to iTunes or Google Play to download the EWelink app. Once the setup
process is complete you may use other smart phones and tablets. Generally, only one device can be signed in at
one time to control the fan (Exception: If you have more than one EWelink account and you share control.)
Before setting up the Wi-Fi control, check the following:
Your smart phone or tablet is connected to a 2.4 GHz Wi-Fi network with internet access.
You have the correct Wi-Fi password.
Your phone or tablet has access to iTunes or Google Play.
Your router is MAC - open.
1. Set up EWelink app
Scan the QR code to download the free EWelink APP and user guide or search for "EWelink"
EWelink app on iTunes
2. Sign into or register your EWelink account.
IMPORTANT: Perform these tasks before the fan has been
installed. Provide power to the control box ONLY to connect
the Wi-Fi receivers to the home network.
EWelink app on Google Play
EWelink detailed user guide
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Tamarack Technologies GHOST HV3400 WcR38
Summary of Contents for Tamarack Technologies GHOST HV3400 WcR38
- Page 1 Wi-Fi/RF Control Set Up Instructions – Companion Manual for the GHOST HV3400 Model WcR38/WcR50 IMPORTANT: Perform these tasks before the fan has been installed. Provide power to the control box ONLY to connect the Wi-Fi receivers to the home network. Devices that must be present to control the Wi-Fi fan •...
- Page 2 3. Pair the HV3400 Wi-Fi control box to the home network with the EWelink app. a. Provide power to the control box without it being connected to the Ghost fan. b. Remove the lid to the HV3400 control box to gain access to the EWelink Wi-Fi device. Use a #1 sized Phillips head screw driver to remove the 4 black screws on the black box lid.
- Page 3 4. (OPTIONAL) Program the Hand Held Remote The Wi-Fi / RF models are provided with a 4 button pre-programed hand held (key fob) remote. The “A” button controls ON/OFF power to the fan. The “B” button controls LOW/HIGH speed. C & D are not in use.
- Page 4 Optional: Wiring manual switches to operate the fan, bypassing the Wi-Fi control. There are three wires located in the junction box hard mounted to the HV3400 Wi-Fi Box that will allow for the use of two SP/ST (single pole / single throw) wall switches to bypass the Wi-Fi method of control.
Need help?
Do you have a question about the GHOST HV3400 WcR38 and is the answer not in the manual?
Questions and answers