Table of Contents
Advertisement
FEATURE SETTINGS
Set Tone/Pulse
When your telephone left the factory, the dial mode was set to tone. If you do
not have touch tone dialing service, you can change this setting to PULSE by fol-
lowing these steps:
1. After setting the call waiting feature, press OPTIONS once (or from the
idle screen, press OPTIONS ten times), the screen will show:
2. Press the p or q keys to toggle between TONE and PULSE.
3. When the desired dial mode is displayed on the screen, press OPTIONS to
save your selection and exit the options menu.
NOTE: If you have pulse dial (rotary) service, you can switch to touch tone dial-
ing during a call by pressing *. This can be useful if you need to send tone signals
to access answering systems or long distance services.
After hanging up or pressing FLASH, the telephone automatically returns to its
original dial mode.
Advertisement
Table of Contents
