Table of Contents
Advertisement
FEATURE SETTINGS
Set Local Area Codes (LACs)
Local area codes are area codes associated with other telephone numbers for
which you must dial the area code, but do not need to dial 1. This includes your
own area code if you must dial the area code but not 1 to make calls in your own
area code.
Up to four local area codes can be programmed.
Do not program area codes for which you must dial a 1
If you dial...
11 digits
(1 + area code + phone
number)
10 digits
(area code + phone
number)
10 digits
(area code + phone
number)
1. After setting the home area code (or press OPTIONS three times from
the idle screen), the screen will display:
2. Press p or q until the screen displays the first digit of the first local area
code. Do not use the keypad to enter digits.
3. Press DISPLAY DIAL to save the digit and advance to the next digit.
4. Repeat steps 2 and 3 for the second and third digits of the local area code.
5. Press OPTIONS to program another local area code when the screen
displays
:
6. Repeat steps 2-5 to enter the digits of the next local area code.
7. Repeat steps 2-5 to program a third and fourth local area code.
8. Press OPTIONS to save the local area codes and continue to set the time/
date.
For...
All calls outside your own
area code
Some calls outside your own
area code
All calls within your own
area code
0
.
Then, in steps 2-4
Make no entry.
Enter area codes that do
not require a 1.
Enter your own area
code.
Advertisement
Table of Contents
