Controller Function Set - Vents PA 01W Operation Manual

10

COntrOller FunCtiOn Set

Fig. 8
The digital controller is the principal control unit component (Fig. 8).
The digital controller has the following controls and indicators:
indicator — backlit LCD indicator. The indicator displays the current system operation parameters,
temperature, parameter settings and alarms;
Buttons — the digital controller has 6 buttons with the following functions:
eSC — to navigate one level up through the circular list tree (see «Controller Circular List Tree
Menu») or to cancel parameter editing.
enter — to navigate one level down through the circular list tree (see «»Controller Circular List
Tree Menu»»);
leFt — to navigate left through the function list; to decrease the parameter being edited.
riGHt — to navigate right through the function list; to increase the parameter being edited.
F1 — to enter the controller menu.
F2 — to enter the factory controller settings.
Indicator
Indicator
Buttons
LEDs
pa W
Left Right