Start Decode & Stop Decode; Return Default Parameters & Firmware Revision - Mindeo ES3600 User Manual

4-1-4 Start Decode & Stop Decode
Start Decode
Format
Note: Activate the scanner to scan barcodes when Scan Mode is Host.
Stop Decode
Format
Note: Deactivate the scanner to scan barcodes when Scan Mode is Host.
4-1-5 Return default parameters & firmware revision
Load Defaults
Format
Set the parameters to the default values.
Write to Custom Defaults
Format
Write the current parameter setting to the custom default settings.
Restore Custom Defaults
Format
Restore custom default settings to current settings. If failed, restore default settings.
Firmware Version List
Format
Request the software revision string from the scanner.
<SYN>
0x16
<SYN>
0x16
<SYN>M<CR>
0x16 0x4D 0x0D 0x25 0x25 0x25 0x44 0x45 0x46
<SYN>M<CR>
0x16 0x4D 0x0D 0x25 0x25 0x57 0x43 0x44 0x46
<SYN>M<CR>
0x16 0x4D 0x0D 0x25 0x25 0x52 0x53 0x44 0x46
<SYN>M<CR>
0x16 0x4D 0x0D 0x25 0x25 0x25 0x56 0x45 0x52
T <CR>
0x54 0x0D
U <CR>
0x55 0x0D
%%%DEF
%%WCDF
%%RSDF
%%%VER
94
.
0x2E
.
0x2E
.
0x2E
.
0x2E