Table of Contents
Advertisement
7 Enable & Disable configuration by scanning barcode
Note: The setting of the below two barcodes does affect the operation of scanning the barcodes in 10
Return default parameters & firmware version.
Enable configuration by scanning barcode (Default)
The default status of the scanner is enabled to scan configuration barcode.
Disable configuration by scanning barcode
Scan the above barcode to disable scanning configuration barcode, then the scanner will not
operate configuration by scanning configuration barcodes, but the data string of configuration
barcode will be displayed. If you want to operate configuration by scanning configuration barcodes,
please scan "%PSCEN" barcode.
100
Advertisement
Table of Contents
