Decode Illumination And Decode Aiming Mode - Mindeo MD7919 User Manual

3-9 Decode illumination and decode aiming mode

Decode illumination mode: Enable illumination causes the scanner to turn on the illumination to aid
decoding. Disable illumination to turn off illumination for the scanner during decoding. Better quality
images could be obtained with illumination support. The effectiveness of the illumination decreases as
the distance to the target increases.
Decode aiming mode: When this option is enabled, the scanner will project the aiming pattern during
the code capture.
Level of decode illumination: This parameter can be adjusted for different level of decode illumination.
Holding time of aiming light on:
(1) Push-open: After the scanner finishes the scanning action (release the key/successfully read the
code),the aiming light will remain on until the "holding time of aiming light on" ends and the aiming light
will be turned off.
(2) Vibration-on: When the scanner is in non-deep sleep state and the vibration sensor in the scanner
senses the external environment vibration, the sight light will remain on until the sight light on Hold time
is over.
Note: This function is only valid in "scanning mode: 0401D01,0401D01,0401D04" and "Decode aiming
pattern: On when reading(9002D03).
Decoding light source: By changing the Settings and adjusting the color of the decoding light source,
you can help the scanner to obtain better images, improve decoding performance.
Illumination mode of Auto-detection:
Always off- Illumination LED will be always turned off.
Enable illumination in low light conditions- In low light conditions, the scanner will turn on
illumination LED automatically to ensure normal work. While in other light conditions, the illumination
LED will be turned off automatically.
Always on- Illumination LED will be always turned on.
Note: This function is only valid in Auto-detection mode.
26