Advertisement
5.0 Assembly Instructions
You will need the following tools to assemble your Paddy Wagon:
•
Phillips Screwdriver;
•
1/4" Hex Wrench and;
•
9/16" Open End Wrench.
Immediately after unpacking, check off parts received against the packing list (Figure 1 on page 5 &
Figure 2 below). Also, examine for any physical signs of damage incurred during shipment. The
machine is inspected before and after packaging at our plant. The responsibility for filing a claim
against the carrier for damages incurred during shipment rests with the receiver of the goods (FOB
our factory).
Two people should be used to take the base and top out of the box, Figure 3. They're fairly heavy
and awkward to handle for one person. If you don't have two people, carefully cut the side out of the
box and slide the pieces onto the floor.
Figure 2
Figure 3
5.0 Assembly Instructions
7
Advertisement
