Challenge PADDY WAGON Instructions And Parts Manual page 10

The other person should insert the pivot screw with a large washer between the stand and the table
frames, Figure 6.
Place a second large washer on the bolt, then secure one of the smaller washers with one of the hex
nuts. Repeat on the opposite side, Figure 7.
mounting the table assembly onto the stand.
Tilt the top section back and rest it on one of the filler boxes, Figure 8.
Figure 6
Figure 7
PINCH POINT. While assembling machine, care should be taken when
Figure 8
5.0 Assembly Instructions
9