Sharp PN-L803C Service Manual page 24

1 – 2.MOUNTING PRECAUTIONS
- When installing, removing or moving the monitor, ensure that
this is carried out by at least 4 people.
- Be sure to use a wall-mount bracket designed or designated for
mounting the monitor.
- This monitor is designed to be installed on a concrete wall or
pillar. Reinforced work might be necessary for some materials
such as plaster / thin plastic board / wood before starting
installation.
This monitor and bracket must be installed on a wall which can
endure at least 4 times or more the weight of the monitor.
Install by the most suitable method for the material and the
structure.
- To attach a VESA-compliant mounting bracket, use M6 screws
that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the
thickness of the mounting bracket.
- Do not use an impact driver.
- After mounting, please carefully ensure the monitor is secure,
and not able to come loose from the wall or mount.
- Do not use any screw holes other than VESA holes for
installation.
- When moving the monitor, be sure to hold it with the handles
and the unit bottom. Do not grasp the screen, tray, speaker, or
speaker cover. This may cause product damage, failure, or
injury.
- If you need to temporarily place the monitor on a table or other
surface during installation, spread a thick soft cloth on the table
to prevent damage to the screen and table.
- Prior to repacking or removal, remove the tray and speaker
covers.
PN-L803C/80TC3 INSTALLATION, ADJUSTMENT, SETTING, OPERATION 2 - 2