Hyundai TVL-151M Service Manual page 15

----------------------------------------------------------------------------------------------------------------------
3-2. Inspection Specification of INVERTOR ( Total inspection )
1 Turn off the power of JIG ( check the power of JIG )
2 Connect 2P CONNECTOR in the upper part of JIG to CN3
3 Connect 2P CONNECTOR in the lower part of JIG to CN2
4 Connect 5P CONNECTOR of JIG to CN1
Turn on the power of JIG → POWER ON
5
6 Check the screen is displaying normally
7 Change "Brightness" and check the variation of brightness level
8 Turn off the power of JIG
9 Disconnect the Connector
1) TEST PATTERN : White / Black Pattern
RMK
2) In the time of connection & disconnection the CONNECTOR,
surely turn off the power of JIG , and then go on inspection
=> warning : pay attention to high voltage
----------------------------------------------------------------------------------------------------------------------
SERVICE MANUAL
Insepction procedure
TVL-151M / 201M
비 고
Standard
Back-Light Con'
Back-Light Con'
Inverter Con'
15