P5510
Users Manual
Ancillary Equipment
Dirt/Moisture Trap, P5531
Angle Adapter, P5543
10
1.800.544.2843
Dirt/Moisture Traps provide an effective barrier against the transfer of moisture and dirt
from an instrument under test to the clean pneumatic system of the comparison test pump
and the master test gauge connected to it. Unexpected particle contamination or fluid
inside the device under test will be prevented from entering the test system, avoiding
downtime for maintenance and repair.
To calibrate gauges with the pressure connection on the rear (e.g. panel-mount gauges) in
their correct position, an angle adapter should be used. The angle adapter fits directly
onto the test station, converting it through 90 degrees, allowing the standard adapters to
be used.
www.calcert.com
15
10
20
5
25
0
30
Figure 9. Dirt/Moisture Trap
Figure 10. Angle Adapter
5531 lp trap.jpg
gla09.bmp
sales@calcert.com