Kohler Bellhaven K-T11552 Installation Manual page 7

Apply
plumbers
putty.
3. Install the Showerhead
CAUTION: Risk of product damage. To avoid clogging the
showerhead spray outlets, use thread sealant tape on the shower
arm threads. Do not use thread sealant compound (pipe dope).
Remove the temporary nipple from the shower elbow.
Apply thread sealant tape to the long end of the shower arm.
Using a clean strap wrench, secure the long end of the shower
arm to the shower elbow.
Apply a bead of plumbers putty or other sealant to the back of
the escutcheon according to the putty manufacturer's instructions.
Slide the escutcheon onto the shower arm and press the
escutcheon against the finished wall.
Remove all excess putty.
Turn the main water supply on.
Run hot and cold water through the shower arm to flush out dirt
and debris.
Apply thread sealant tape to the short end of the shower arm.
Thread the showerhead onto the shower arm.
Kohler Co.
Shower Elbow
Escutcheon
Shower Arm
Showerhead
7 1064111-2-A