Canon BJC-85 User Manual page 64

Note
• To create a Selection Box, position the cursor over one corner of the
area to be selected, press and hold down the mouse button, and then
drag the mouse diagonally to the opposite corner of the area you want to
select. Release the mouse button.
• If you position the cursor over a point within the selected area, you can
move the area by dragging. If you position the cursor over one of the
lines indicating the selected area, you can change the size of the
selected area by dragging that line in or out.
• The minimum size of the selected area is 1" × 1" (25.4 mm by 25.4 mm).
• The size of the selected range is displayed in the Image Control Panel.
6
Place the image to be scanned in the printer and click the Scan button.
Remember, only the range indicated by the Selection Box is scanned.
Using the Scanner With Macintosh
Scanning an Image
64