Advertisement
Quick Links
Operation Manual
Sand Filter
51792 (without pump), 51793 (with pump)
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for WilTec 51792
Summary of Contents for WilTec 51792
- Page 1 Operation Manual Sand Filter 51792 (without pump), 51793 (with pump) Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
- Page 2 All rights re- served. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 The pond pressure filter has to be horizontally fixed with screws on a suitable mounting place. • The universal-hose stepped tails can be shortened according to the hose diameter if necessary. • Attach hoses and hose clamps. © by WilTec Wildanger Technik GmbH Item 51792, 51793 Page 3 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 4 How to install the filter tank 1. Mount the sand tank to sand filter support according to the instruction below. 2. Insert the pump base to the sand filter support in the correct direction. © by WilTec Wildanger Technik GmbH Item 51792, 51793 Page 4 http://www.WilTec.de...
- Page 5 (The pump port on the valve needs to point towards the pump.) 5. Connect the sand tank to the pump with the hose, hose clamps, and hose adaptors. (1) Pump port © by WilTec Wildanger Technik GmbH Item 51792, 51793 Page 5 http://www.WilTec.de...
- Page 6 FILTER, and restart the pump for normal filtering. WASTE To bypass filter for draining or lowering water level and for suck heavy debris directly to waste. © by WilTec Wildanger Technik GmbH Item 51792, 51793 Page 6 http://www.WilTec.de http://www.aoyue.eu...
- Page 7 Filter head and multifunction valve Clamp assembly O-ring Sand tank Diffusor assembly Drain plug Hose Hose clamp Hose adaptor Pump Sand filter support Gauge assembly © by WilTec Wildanger Technik GmbH Item 51792, 51793 Page 7 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
-
Page 8: Troubleshooting
Contact a qualified person. sound can be heard. Check hose clamps. Water leak Leaking spot If leak is between the pump and the motor, contact qualified per- son. © by WilTec Wildanger Technik GmbH Item 51792, 51793 Page 8 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de... - Page 9 This logo indicates that this electric equipment must not be disposed with the domestic waste. The company WilTec Technik GmbH has been registered in the German registry EAR under the WEEE- registration number DE45283704. Disposal of used electrical and electronic appliances...
Need help?
Do you have a question about the 51792 and is the answer not in the manual?
Questions and answers