Table of Contents
Advertisement
OM-USB-1208HS Series User's Guide
If the Status LED is off
If the
Status
LED is on but then turns off, the computer has lost communication with the OM-USB-1208HS
Series device. To restore communication, disconnect the USB cable from the computer and then reconnect it.
This should restore communication, and the LED should turn on.
Calibrating a OM-USB-1208HS Series Device
OM-USB-1208HS Series devices are shipped fully calibrated. Calibration coefficients are stored in EEPROM.
Return the device to Omega Engineering when calibration is required. The normal calibration interval is once
per year.
Installing a OM-USB-1208HS Series Device
9
Advertisement
Table of Contents
