Advertisement
Riverside
email: info@riverside-furniture.com
F-A
ASSEMBLY STEPS :
1. Remove both drawers from the Storage Footboard. Refer to the steps above.
2. Place the Storage Footboard (F-A) face down on a clean and soft surface.
3. Attach the Support Legs (F-C) to the storage footboard by using the Flat Washers
(F-I), Spring Washers (F-H) and Bolts (F-G). Tighten with the Allen Wrench (F-J).
Myra Bed Room
Queen Storage Bed
FURNITURE
Assembly Instructions
Detail: C
Detail: D
Made in Viet Nam
To remove the drawer:
A. Pull the drawer fully open so the
black latch is visible in the inside
channel of the guides.
B. Release the latches by
simultaneously pushing one lever up
and the other down.
C. At the same time, pulling the
drawer forward until the slides
release.
F-B
F-C
F-I
F-H
F-J
F-G
F-C
Page 4 of 7
Advertisement
