Riverside Furniture Myra 59428 Assembly Instructions

Components and Hardware List
STEP 1 : Fit the bottom end of the pneumatic Cylinder (E) into center of the Metal Base Frame as
shown. Press down firmly on the Pneumatic Cylinder to secure.
STEP 2 : Press the caster (F) into the holes of the Metal Base Frame.
STEP 3 : Attached the Wood Caps (D) to the Metal Base (C) by using Screws (K) and your Phillips
Screwdriver as shown.
If present, remove the
plastic cover from the top
end of the cylinder before
assembling to seat.
Myra
Home Office
Assembly Instructions
Be sure to check all packing material
carefully for small parts, which may have
come loose inside the carton during
shipment. To prevent scratches or damage,
assemble the chair on a soft surface such as a
blanket or carpet.
Made in Viet Nam
#59428
Upholstered Desk Chair
TOOLS REQUIRED
(NOT PROVIDED)
Page 1 of 2