Riverside Furniture 36458 Assembly Instructions

Page 1 of 2
Mix-n-Match Chairs
Made in Viet Nam
Dining Room
Assembly Instructions
Components and Hardware List (for one chair)
#36458
Side Chair Wood Seat
Be sure to check all packing material carefully for small parts, which may
have come loose inside the carton during shipment. Separate, count and
check all parts against the Components and Hardware List above. Failure to
use the correct length bolts in the proper locations may result in an unsafe
product and could also cause damage to the parts being assembled.
To prevent damage, assemble on a soft surface such as a blanket or carpet.
Do not fully tighten the bolts until the complete chair has been assembled.
Once the complete chair is assembled, set it upright on a flat surface to level
the chair. Using the provided Allen Key, tighten all the bolts.