Advertisement
•
Avoid exposing the device to direct jets of water.
•
The user is responsible for complying with local safety and mounting regulations. If necessary,
ask a qualified electrician.
•
In case of device failure, repairs can only be carried out by an electrician.
Special safety instructions
For your own safety, obey the following instructions, for otherwise material damage and/or
personal injuries might result:
•
During operation, parts of this station can reach temperatures up to 480 ℃; therefore:
o
do not use the station near flammable gases, paper, or other flammable substances;
o
avoid touching hot parts of the station, for otherwise you might seriously injure yourself;
o
do not touch metallic pieces that are near the desoldering tip.
•
Overheating protection
o
The device is equipped with an automatic overheating protection that switches off the device
in case one of the temperatures is too high.
o
The device re-switches itself on as soon as its condition has normalised.
•
Handle the device with care.
o
Never drop it, never expose it to shock/pushes!
o
The device contains fragile components that might be destroyed when not handled with
care.
•
Disconnect the device from the mains before not using it for a longer period of time, if the power
has gone off, or before opening it.
•
During soldering, vapours form that might be harmful. Only perform soldering inside a well-
ventilated work zone to avoid harmful accumulations.
•
Do not modify the device in any way.
Electrical connection
The electrical connection is made to an earthed socket 230 V ~ 50 Hz. Min. fuse 10 A.
Initial operation
•
Place the device on a level and solid surface the temperature of which does not exceed 40 ℃.
Place the device horizontally to allow the station to operate correctly.
•
Connect to mains.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 90474
Page 4
08
2021-1
Advertisement
