NOTE:
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
"Cleaning and Maintenance".
according to chapter
Appliance Equipment
Appliance overview
1 Freezer
2 Temperature control /
Interior light
Delivery scope
2x glass shelf, 1x vegetable box, 3x door storage
incl. mounting material
rack, 1x egg tray,
Installation
Conditions for the installation location
Good ventilation is required around the appliance
-
to dissipate the heat properly and to guarantee ef-
ficient cooling operation at low power consump-
tion. Enough clearance is necessary.
Refer to the instructions which we give you in
-
"Built-in"
;
Place the appliance so that the appliance door
-
can open without being impeded.
Only install at a location with an ambient tempera-
ture suitable for the climate class of the appliance.
3 Glass shelves
4 Vegetable box
5 Door storage racks
The climate class can be found under
Data"
and on the rating label located in the interior
or on the appliance rear.
Look for stable, horizontal appliance position.
Avoid the installation:
near heaters, next to a stove, direct sunlight or
-
any other heat sources;
at locations with high humidity (e.g. outdoors,
-
bathroom), as metal parts would be suscepti-
ble to corrosion under such circumstances;
near volatile or flammable materials (e.g. gas,
-
fuel, alcohol, paint, etc.), in rooms which may
have poor air circulation (e.g. garages).
Do not expose the appliance any weather.
-
Electrical connection
WARNING:
The installation to the mains supply must conform
to the local standards and regulations.
Improper connection may cause to an electric
shock!
Do not modify the appliance plug. If the plug does
not fit properly to the outlet, let install a proper
outlet by an authorized specialist.
The accessibility of the power plug must be en-
sured to disconnect the appliance from the power
supply in case of emergency.
Make sure that the voltage supply matches the
specifications on the rating label before connect-
ing.
Connect the mains cable to a properly installed
and earthed wall outlet.
If the plug after installation is not accessible, a
corresponding disconnect device must be availa-
ble to meet the relevant safety regulations.
20
"Technical