Download Print this page
ECCB OUTDOOR Coastal Assembly Instructions

ECCB OUTDOOR Coastal Assembly Instructions

Advertisement

Quick Links

Important
Please Read All Instructions Carefully Before Assembling This Product
• Inspect all parts to make sure that nothing is broken or missing. If something is broken
or missing, please contact our service department at support@eccboutdoor.com.
• The side table must be completely assembled before attempting to use it. Failure to do so
could result in damage to the table or the user.
• Use proper safety gear and follow appropriate safety precautions when assembling this product.
• Important - Do not overtighten the screws.
• Only hand tools should be used for assembly. Do not use power tools.
• ECCB Outdoor will not be liable for any injury or damage resulting
from improper assembly and/or use of this product.
• Failure to follow all instructions will result in the product warranty being voided.
ECCB
O U T D O O R
966 Perry Highway, Mercer, PA 16137 • Phone (800) 687-5086
ECCBOutdoor.com
Assembly Instructions
Coastal Side Table
Congratulations on the purchase of your new
poly lumber side table. These easy step-by-step
instructions can be used for assembling either the
Coastal 4-Plank Side Table (shown)
Coastal 6-Plank Side Table.
or
V1

Advertisement

loading

Summary of Contents for ECCB OUTDOOR Coastal

  • Page 1 • Important - Do not overtighten the screws. • Only hand tools should be used for assembly. Do not use power tools. • ECCB Outdoor will not be liable for any injury or damage resulting from improper assembly and/or use of this product.
  • Page 2 Parts Make sure you have received everything. If anything is missing or damaged, please contact our service department support@eccboutdoor.com. Table Top - 1 piece Bottom Shelf - 1 piece Legs - 2 pieces Hardware - Shown at Actual Size D Bolts - 4 pieces F Nuts - 4 pieces Washers - 4 pieces Important: When attaching the nuts, ALWAYS start with the metal part screwing onto...
  • Page 3 Let’s Get Started! Step 1 - Attaching the Legs • Start with the bottom of table top (A), facing up. • Line up the legs (C) with the pre-drilled holes of the top (A), making sure the brace is facing outwards. •...