Summary of Contents for ECCB OUTDOOR EO-CREEK-ADK-CH
Page 1
• Important - Do not overtighten the screws. • Only hand tools should be used for assembly. Do not use power tools. • ECCB Outdoor will not be liable for any injury or damage resulting from improper assembly and/or use of this product.
Page 2
Parts Make sure you have received everything. If anything is missing or damaged, please contact our service department at support@eccboutdoor.com. Back - 1 piece Seat - 1 piece Arms - 2 pieces 1 Right 1 Left (with cupholder) (with wine/cell phone holder) Hardware - Shown at Actual Size...
Page 3
Let’s Get Started! Step 1 - Attach the Arms to the Seat • Open arm (C) to a 90° angle to create the bracing. • Turn seat (B) on its side. • Attach the arm (C) to the seat (B) with 2 bolts (D) into the pre-drilled holes on the outside, and a washer (E) and nut (F).
Page 4
Step 3 - Attach the Back • Attach the arms (C) to the back (A) using the 3.5” lag screws (H) in the pre-drilled holes, and tighten with the Allen wrench. • Then attach the back (A) to the seat (B) by placing the 2” lag screws into the pre-drilled holes on the back. Because the seat does not have pre-drilled holes, you will need to apply more pressure when attaching...