Advertisement
Quick Links
Important
Please Read All Instructions Carefully Before Assembling This Product
• Inspect all parts to make sure that nothing is broken or missing. If something is broken
or missing, please contact our service department at support@eccboutdoor.com.
• The chair must be completely assembled before attempting to use it. Failure to do so
could result in damage to the chair or the user.
• Use proper safety gear and follow appropriate safety precautions when assembling this product.
• Important - Do not overtighten the screws.
• Only hand tools should be used for assembly. Do not use power tools.
• ECCB Outdoor will not be liable for any injury or damage resulting
from improper assembly and/or use of this product.
• Failure to follow all instructions will result in the product warranty being voided.
ECCB
O U T D O O R
966 Perry Highway, Mercer, PA 16137 • Phone (800) 687-5086
ECCBOutdoor.com
Assembly Instructions
Outer Banks Value Line Adirondack Chair
Congratulations on the purchase of your
new Outer Banks Value Line Poly Lumber
Adirondack Chair. You will soon be sitting
back and relaxing in the comfort of this
classic chair when you follow these
easy step-by-step instructions.
V1
Advertisement
Related Manuals for ECCB OUTDOOR Outer Banks Value Series
Summary of Contents for ECCB OUTDOOR Outer Banks Value Series
- Page 1 • Important - Do not overtighten the screws. • Only hand tools should be used for assembly. Do not use power tools. • ECCB Outdoor will not be liable for any injury or damage resulting from improper assembly and/or use of this product.
- Page 2 Parts Make sure you have received everything. If anything is missing or damaged, please contact our service department at support@eccboutdoor.com. Back - 1 pc Seat - 1 pc Arms - 2 pcs Brace - 1 pc 1 Right (with cupholder) 1 Left Hardware - Shown at Actual Size...
- Page 3 Let’s Get Started! Step 1 - Attach the Brace to the Seat • Attach the brace (D) to the seat (B) using a bolt (E) and washer (G) on the outside, and a washer and nut (H) on the inside of each hole. You will need the open-ended wrench and the socket & ratchet for this step. •...
- Page 4 Step 3 - Attach the Arms • Attach the arms (C) to the back (A) using only the lag screws (F) and the allen wrench provided. • Then attach the front of the arms (C) to the brace (D) using the hardware shown below. Make sure the bolt is inserted from the inside of the chair when attaching the arm to the brace.