OBSIDIAN CONTROL SYSTEMS NETRON EP2 Installation Manual page 9

I N S TA L L AT I O N I N S T R U C T I O N S
CLAMP INSTALLATION
Insert 18.8 steel M10x25mm or M12x25mm bolt (not included) through the respective mounting hole
of the clamp (not included), and then thread it into the matching 10M hole on top, or 12M hole on
bottom. The bolt must be threaded at least 18mm (0.7ins) into the fixture base.
M12
M10
A Truss
installed on top (10M) or
bottom (12M) of EP2 Fixture.
9
Clamp can be