Table of Contents
Advertisement
I N S TA L L AT I O N I N S T R U C T I O N S
Wall-Mount/Panel Installation: Chassis Reassembly
To reconfigure the EP2 to its original form, remount
the internal multi-use mounting-bracket to the case
and secure it with (4) hex-screws.
All wiring and connections
must be performed by a
qualified electrician.
Once a qualified technician/electrician
has reconnected the control surface
panel
connectors, the control surface panel
can then be mounted and secured to
the base assembly with (4) torx-screws.
13
with
the
power
and
data
Advertisement
Table of Contents
