Table of Contents
Advertisement
I N S TA L L AT I O N I N S T R U C T I O N S
Wall-Mount/Panel Installation: Chassis Disassembly
The wall-mount/panel installation option requires
the control panel to be removed from the mounting
case, the internal multi-use mounting-bracket
removed, and then remounted to the junction box.
After the control surface panel has been wired by a
qualified electrician, the control panel can then be
remounted to the multi-use mounting-bracket.
2. Remove the (4x) hex-screws securing the
integrated multi-use mounting-bracket to the
mounting case. This will be used to mount to
the control panel.
All wiring and connections
must be performed by a
qualified electrician.
1. Remove torx-screws securing the
control surface panel to the integrated
multi-use mounting-bracket and lift.
A qualified technician/electrician can
then disconnect the data and power
connectors from the control surface
panel to the mounting case.
10
Advertisement
Table of Contents
