Table of Contents
Advertisement
Starting LSI MegaRAID SAS RAID Configuration Utility
To start LSI MegaRAID SAS RAID Configuration Utility for MegaRAID
SAS 8204ELP, press CTRL-M when you see the RAID BIOS during POST.
After POST finished, the Adapter Selection page will show on the
screen. Please click on Start to launch the configuration menu.
Loading Factory default setting
1
Select Objects from Management menu.
2
Select Adapter from Objects. The selectable adapter will be
listed.
3
Press Enter on the adapter and the adapter setting will be shown
on the screen. You can change the setting from this menu.
4
Select Factory Default and Yes to load the default settings.
5
Exit the configuration utility and press <Ctrl> + <Alt> + <Del> to
reboot the server.
Creating a RAID volume
1
Select Configuration from Management Menu.
2
Select New Configuration from the Configuration menu. An
array selection window displays the devices connected to the
current controller.
3
Press the arrow keys to choose specific physical drives and press
spacebar to associate the selected drive with the current array. The
indicator for selected drive change from READY to ONLINE.
4
After you adding the drives to current array, press Enter to finish
creating current array.
5
Press Enter again to select array to configure.
6
Press spacebar to select the array and press F10 to configure the
logical drive
7
Select Accept and press Enter to use the default setting for the
RAID volume.
8
Press Enter to end the array configuration.
9
Select YES to Save Configuration and press any key to return to
the Configuration menu.
10 Press ESC to return to the Management Menu.
113
Advertisement
Table of Contents
Troubleshooting
