Verifying The Image Before Scanning - Canon FS 2710 User Manual

Verifying the Image Before Scanning

Before initiating the final scan, it is advisable to check the intended results with the
Browser function. The image in the Browser window is more accurate than the one in
the Preview window, allowing you to verify the results more precisely before scanning.
To Verify the Image
Before scanning, set the image type, output device, magnification, operat-
ing environment, and preference.
Click on the [Browser] button.
• The Selection Tool will appear in the Preview window to enable a portion of the
image to be selected.
• The size and shape of the Selection Tool cannot be changed because it is auto-
matically determined by the scanning resolution setting.
Hint
The Browser button is disabled when the image area is too small (less than 64 x
64 pixels).
Place the mouse cursor inside the selection frame.
• The mouse cursor will change to a [+] shape.
Move the Selection Tool to the desired position with the mouse cursor.
• Moving the mouse will move the Selection Tool.
• The Selection Tool will not move when the scanning resolution is too low.
(pp. 26-34).
35
35
S T E P 2
Selection Tool