Canon FS 2710 User Manual page 22

To Set the Scan Mode
Select the Scan Mode box on the control panel and choose the desired scan
mode.
Hint
Scanning the same image in the five different scan modes produces different
file sizes. By size, Black & White mode requires the least disk space, followed in
order by the 8bit Grayscale and 12bit Grayscale modes and the 24bit Color and
36bit Color modes. Before scanning, check the data volume indicator on the
control panel.
The numerator indicates the amount of disk
space required for the scanned image while
the denominator indicates the amount of disk
space available. When the required space
exceeds the available space, the scan button is
unavailable.
Caution
• Even if the indicator shows there is not enough space available, there may be
occasions when you can click the scan button but the system will return an
error (Insufficient memory).
Click the box to open the
pull-down menu.
(See Troubleshooting p. 69)
22
22
S T E P 2