Rotating or Reversing Images Before Scanning
To Change the Orientation of an Image
Specify the Scan Area
See Aspect Ratio
Click on any one of the
Rotation],
The image will be rotated or flipped in the Preview window.
Click on the [Scan] button.
• The scan will initiate.
• The Plug-in module FS control panel will close and the Photoshop window will
open and display the acquired image.
Hint
• If the selected Scan Area is too small (less than 64 x 64 pixels), the Scan button
will not respond to a mouse click.
• Even after scanning is completed, there may be occasions when the Plug-in
module FS control panel does not close. You can correct this with the [Pre-
view Window] command on the [Preferences] menu.
An image may be rotated or reversed before scanning. As with a
normal scan, Plug-in module FS automatically closes and returns to
Photoshop once the scan is complete.
(p.
28).
[180˚ Clockwise Rotation],
[90˚ Counterclockwise Rotation], or
42
42
S T E P
3
[90˚ Clockwise
[Flip] buttons.
(p. 31)