Gree GWH09AGA-K6DNA1A Service Manual page 116

Service Manual
Step
7. Remove right side plate
Remove connection screws connecting
the right side plate with the valve support
and the electric box. Then remove the
right side plate.
8. Remove the nut and gasket on the blade and then
remove the axial flow blade
Remove the nut and gasket on the blade
and then remove the axial flow blade.
9. Remove motor and motor support
Remove the tapping screws fixing the
motor and disconnect the leading wire
insert of the motor. Then remove the
motor.
Remove the tapping screws fixing the
motor support and lift the motor support to
remove it.
Installation and Maintenance
Procedure
axial flow
gasket
nut
motor support
motor
right side plate
113