Right Control Panel View - Dell EMC VxRail P570 Owner's Manual

Right control panel view

Figure 8. Right control panel view
Table 6. Right control panel features
Item Indicator, button, or
connector
1 Power button
2 USB port (2)
3 iDRAC Direct port
4 iDRAC Direct LED
5 VGA port
iDRAC Direct LED indicator codes
The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC
subsystem.
iDRAC Direct LED indicator is located below the iDRAC Direct port on the right control panel.
You can configure iDRAC Direct by using a USB to micro USB (type AB) cable, which you can connect to your laptop or tablet.
The following table describes iDRAC Direct activity when the iDRAC Direct port is active:
Table 7. iDRAC Direct LED indicator codes
iDRAC Direct LED
indicator code
Solid green for two
seconds
Flashing green (on for
two seconds and off for
two seconds)
14 VxRail overview
Icon
N/A
Condition
Indicates that the laptop or tablet is connected.
Indicates that the laptop or tablet connected is recognized.
Description
Indicates if the VxRail is turned on or off. Press the power
button to manually turn on or off the VxRail.
NOTE: Press the power button to gracefully shut down an
ACPI-compliant operating system.
The USB ports are 4-pin, 2.0-compliant. These ports enable you
to connect USB devices to the VxRail.
The iDRAC Direct port is micro USB 2.0-compliant. This
port enables you to access the iDRAC Direct features. For
more information, see the iDRAC User's Guide at Dell.com/
idracmanuals.
The iDRAC Direct LED indicator lights up to indicate that the
iDRAC Direct port is connected. For more information, see
iDRAC Direct LED indicator codes
Enables you to connect a display device to the VxRail. For more
information, see Technical specifications
on page 14.
on page 20.