Table of Contents
Advertisement
Quick Links
Radio rolling shutter
opening detector
Description
This device is the radio version of the wired detector, item 3514. It generates an alarm if
anyone attempts to open a rolling shutter.
It consists of two elements:
- a coil guide type rope detector to be fitted to the rolling shutter;
- a battery powered radio transmitter to be installed inside the box of the rolling shutter
or on the frame of the window to be protected.
Also supplied is an NC contact with additional magnet for the protection of doors and
windows.
The alarm is generated when the rope of the detector changes length following an
attempt to open the rolling shutter.
Technical data
- Power supply:
3.6 V lithium battery - type 1/2 AA
- Operating temperature:
5 – 40°C (indoor use)
- Minimum battery duration: 3 years
- Radio frequency:
868.35 MHz
- Range:
100 metres free field
(metal, concrete walls and metal plates reduce coverage)
- Modulation:
FSK
CONFORMITY DECLARATION
Item 3445 meets the essential requirements of directive 1999/5/CE, as it complies with
the following standards:
ETSI EN300 220-3 ETSI EN301 489-3 EN60950 EN50090-2-2 EN50090-2-3
Year of approval of the CE mark in accordance with the above directive: 2007
Dimensional data
120
Radio transmitter
Radio transmitter
32
Rope rolling shutter detector
MQ00054-c-EN
28/04/2014
Rope rolling shutter detector
100
90
17
3445
15
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for LEGRAND bbcino 3445
Summary of Contents for LEGRAND bbcino 3445
- Page 1 Radio rolling shutter opening detector 3445 Description This device is the radio version of the wired detector, item 3514. It generates an alarm if anyone attempts to open a rolling shutter. It consists of two elements: - a coil guide type rope detector to be fitted to the rolling shutter; - a battery powered radio transmitter to be installed inside the box of the rolling shutter or on the frame of the window to be protected.
- Page 2 Radio rolling shutter opening detector 3445 Configuration The device requires allocation of the zone it belongs to, the progressive number of the sensors within the same zone, and the setting of the detection mode, as well as the possible allocation of an auxiliary prealarm channel. WARNING: The configuration operations must be performed with the battery disconnected This configurator assigns the number of the appropriate zone to the detector.
- Page 3 Radio rolling shutter opening detector 3445 Configuration Pairing detectors Cancelling detectors 1. Switch the system to “maintenance” mode. 1. Switch the system to maintenance mode. 2. Press the programming pushbutton of the radio receiver for five seconds, until the red 2.
Need help?
Do you have a question about the bbcino 3445 and is the answer not in the manual?
Questions and answers