Advertisement
STEP11-15
BAG MARKED
12
Installing Steering Linkage
Turnbuckle Cup (Long) A-03-VBC-5016 x 4
32mm Turnbuckle B-02-VBC-5102 x 2
Servo Saver Set for Lightning series B-03-VBC-5017 x 1
M3x10 Roundhead C-02-SC-R0310 x 2
4.7mm Ball Nuts B-02-VBC-5020 x 2
13
Front Top Arm Assembly
Camber Adjuster, Type B B-02-VBC-5105 x 2
Front Upper Arm Pivot Ball C-02-VBC-5114 x 2
M2x6 Round Head C-02-SC-R-0206 x 4
Camber Adjuster, Type B B-02-VBC-5104 x 2
© VBC Racing LIGHTNINGF
All manuals and user guides at all-guides.com
M3x10 Roundhead
Drill the holes to 3mm
Spacer T2 Composite x 4
4.7mm Ball Nuts
Same procedure as on the right side
Camber adjust by plastic pivot ball holder in difference direction
- 1 Deg
12
3 Difference Servo Adaptors included
For Sanwa/KO [A) /Futaba [F] /JR/Hitec [H]
- 1.5 Deg
- 2 Deg
- 2.5 Deg
Make two
19mm
Make sure the pivot ball
smooth freely
M2x6 Round Head
Advertisement
