Excentr 40-25 Quick Start Manual

Quickstart manual
1. Korte beschrijving:
1. Short description:
The Excentr 40-25 floor preparation machine is
designed to easily all kind of floors.
The Excentr 40-25 can also be used to strip or
grind/polish parquet floors with the use of special
pads (without use of chemicals!).
The plastic bumpers on all sides enable you to
accurately work close to edges.
What makes the machine unique is the so-called
Excentr method: the high velocity of 2500
movements per minute. This results in an
unmatched operation of the pad. The machine gives
you the feeling that it 'floats' across the floor, which
makes it easy and relaxed to handle the machine
during operation.
The 40-25 allows ballast plates to be placed on the
machine. This improves the effectiveness of the
Excentr method and thus working speed.
Power Supply: 220VAC, 50-60 Hz, 5A
WITH GROUNDING AND GFCI!
2. Safety:
Almost all accidents can be attributed to:
loss of concentration,
carelessness, negligence or
errors in judgment!
Work calmly and in a concentrated manner:
You have been warned!!
Excentr 40-25
Floor preparation machine
WARNING!
Model 2019
Excentr 40-25
Snelstart handleiding
Short description
Also read the complete user manual!!
You are working with an electrical machine
Make sure that the earthing and GFCI
Make sure that you do not use any damaged
Preferably wear shoes with rubber soles!!
Wear ear protection!
Wear a dust mask when grinding!
Wear safety shoes with rubber
soles!
Take the plug out of the socket:




-page 1 of 2 -
EXCENTR B.V.
Columbusweg 50
NL 4462HB GOES
Tel: +31 (0)88 1700 601
E-mail: info@excentr.com
Safety
Use
Maintenance
Malfunctions
TAKE NOTE!
and (scrub) water.
function properly!!
cables!!
first after the end-of-job
When changing a pad
When maintaining
With repairs
Check the cable often for damage:
Repair a damaged cable first!!
It's all for your safety!!
File:Excentr40-25Krt-v1.0en.docx