Canon Printing Using a Direct Camera/Printer Connection Guide Direct Print Connection Manual page 23

List of Messages
The following messages may appear on the camera LCD monitor if an error occurs
during a camera and Bubble Jet printer connection. (Depending on the Bubble Jet
printer, some messages may not appear.)
Please refer to the Bubble Jet printer's user guide for the appropriate remedies.
: Printing restarts if you select [Continue] and press the SET button. For the
remedies to other messages that might appear, refer to your Bubble Jet printer's
user guide.
No Paper
Paper Jam
Paper Error
No Ink
Low ink level
Waste tank full
Ink Error
Printer error
Printer in use
Paper lever error
Printer cover open
No print head
Hardware Error
File Error
There is no paper in the auto sheet feeder. In the case of a Bubble
Jet printer equipped with a photo paper cassette, the cassette may
be incorrectly inserted or out of paper.
The paper jammed during printing.
The paper is not correctly set in the printer.
The ink tank has run out of ink.
The ink tank needs to be replaced soon. Prepare a new ink tank. If
you select [Continue] in the error screen, you can restart printing.
You can restart printing by pressing the RESUME/CANCEL button
on Bubble Jet Printer. Please request replacement of the waste
tank to the shop where you purchased the printer or your nearest
Canon Customer Support center listed in the Contact List provided
with the Bubble Jet Printer or in the Bubble Jet user guide.
Check the level of the printer's ink and the condition of the waste
tank.
Turn off the printer, then turn it on again. If the error persists, please
consult the dealer where you purchased your printer or your nearest
Canon Customer Support center (listed in the Contact List provided
with the Bubble Jet Printer).
The printer is printing the data from the memory card inserted in the
computer or printer. The printer automatically starts printing the
images from the camera after completing the current printing.
Adjust the paper thickness lever to the proper position.
Close the printer cover securely.
No print head is installed in the printer.
Check whether or not an error other than a paper or ink error has
occurred. Also check the printer's battery charge.
You tried to print an image that is not compatible with PictBridge.
Some images that have been recorded with another camera or
modified using a computer cannot be printed.
PictBridge Printing with Bubble Jet Printers
21