Download Print this page
   

Advertisement

This guide explains the required operations the first time the camera is used, how to download images
to a computer, as well as connecting to a printer for direct printing. For usage precautions and detailed
instructions, please refer to the manuals listed above.
Please refer to the Troubleshooting section of the Software Starter Guide if you have trouble installing the software or downloading
images.
Do not connect the camera to the computer before the software is installed.
CDI-E095-010
XX02XXXX
XXXXXX
Step 1
Preparing the Camera
1.
Install the batteries.
Slide the battery cover lock and open the
battery cover.
Insert the batteries as shown and close the
battery cover.
2.
Install the CF card.
Slide the CF card slot cover
in the direction of the
arrow, and open it.
Insert the CF card with its
label facing out until the
CF card eject button fully
extends and dose the CF
card slot.
ENGLISH
Handling precautions
Camera's detailed operations
Camera User Guide
Software operations
Software Starter Guide
Detailed software operations
ZoomBrowser EX Software User Guide (Windows
ImageBrowser Software User Guide (Macintosh)
(These PDF format manuals are available on the
Canon website. Please download them from the
following URL: http://www.canon.co.jp/Imaging/
information-e.html)
© 2003 CANON INC.
PRINTED IN MALAYSIA
Positive end
Negative end
L Mark
Label Side
CF Card Eject Button
Step 2
Shooting
1.
Turn on the power.
Hold the ON/OFF button down until the indicator next to the viewfinder starts
blinking green.
2.
Turn the mode switch to
3.
Set the date and time. (first time the camera is powered on)
Use the left or right button to select the items you wish to set, and use
®
)
the up or down button to change the value.
To put the settings into effect, press the
4.
Focus.
Point the camera in the direction of the subject you wish to shoot and press the
shutter button halfway. The camera beeps twice when the subject is in focus.
5.
Shoot.
Press the shutter button fully. The shutter sound will sound once when the shot
has been taken. The recorded image is displayed on the LCD monitor for
approximately 2 seconds.
Turn off the power.
Press the ON/OFF button. Even if you do not press the ON/OFF button, the power will
automatically shut down 3 minutes after the last control is accessed.
Step 3
Reviewing an Image
1.
Turn on the power.
Hold the ON/OFF button down until the indicator next to the viewfinder starts
blinking green.
2.
Set the mode switch to
(Replay).
The last recorded image appears in LCD monitor.
3.
View the images.
Use the left or right button to display the image you wish to see.
To Delete an Unwanted Image
1.
Select the unwanted image using the left or
right button and press the
2.
When the confirmation screen appears, check
that [Erase] is selected and press the
button.
Select [Cancel] using the left or right button to cancel without
erasing.
ON/OFF Button
Indicator
(shooting) and set the mode dial to
.
button.
ON/OFF Button
ON/OFF Button
Indicator
button.
Continued on the reverse side.

Advertisement

   Also See for Canon PowerShot A70

   Related Manuals for Canon PowerShot A70

   Summary of Contents for Canon PowerShot A70

  • Page 1: Reviewing An Image

    ➜ ImageBrowser Software User Guide (Macintosh) To put the settings into effect, press the (These PDF format manuals are available on the Canon website. Please download them from the following URL: http://www.canon.co.jp/Imaging/ information-e.html) Focus. Point the camera in the direction of the subject you wish to shoot and press the shutter button halfway.

  • Page 2: Downloading Images To A Computer

    Follow each step below in order. List of Things to Prepare • Camera and computer • Canon Digital Camera Solution Disk provided with the camera • USB cable (use the cable provided with the camera) Steps to Follow Set the Canon Digital Camera Solution Disk in the CD-ROM drive.

This manual also for:

Powershot a60

Comments to this Manuals

Symbols: 0
Latest comments: