IBEX TX31 Quick Start Manual page 5

QUICK START GUIDE
Figure 2 (right side of baler, behind door)
 Spare shear bolts are located on the left side of the machine inside the front door. The
bolt is installed on the front-most sprocket. It will shear if excess strain is placed on the
machine to protect it. It is not normal to shear multiple bolts during normal use.
 When raking, create a windrow that is not too large and not too small for the baler.
The optimal windrow will have a width of 28-32 inches and a height of 12-16 inches.
The more uniform the windrows, the smoother the operation will be and the more
consistent the bale weights will be.
2020-1.3 IBEX EQUIPMENT CO