QUICK START GUIDE TX31 Mini Round Baler with Net Wrap ASSEMBLY TIPS The top part of the metal shipping frame is easily removed to facilitate assembly by removing the four mounting bolts at the base. To install the wheels, the machine must be lifted. Use the two lift hooks on top of the machine if a loader or forklift of suitable capacity are available.
Page 3
If your first use is during a live baling session and you run into problems, there is a risk that the cut hay will be left in the field longer than desirable, and you risk losing a good hay crop. 2020-1.3 IBEX EQUIPMENT CO...
Page 4
You can do this by depressing the sensor switch shown in Figure 2 below. Figure 1 (right side of baler, behind door) 2020-1.3 IBEX EQUIPMENT CO...
Page 5
The optimal windrow will have a width of 28-32 inches and a height of 12-16 inches. The more uniform the windrows, the smoother the operation will be and the more consistent the bale weights will be. 2020-1.3 IBEX EQUIPMENT CO...