IBEX TX31 Quick Start Manual page 3

QUICK START GUIDE
Then install the return spring as shown below.
 A free roll of net comes installed in the machine. Note how it is installed for future
reference, and refer to the owner's manual for tips on installing a new roll.
 Remember to oil all chains before using the machine, including the pickup chain which
is on the lower part of the machine on the left side, obscured by a metal cover.
 As with any new implement, the PTO shaft may need to be cut to length. This is a
common task and there are several videos and written guides found on the internet;
feel free to call us for advice as well at 260-225-3429, option 1 for customer support.
STARTUP ESSENTIALS
 Please be sure to review the owner's manual for full details on how to properly and
safely operate the machine. Some of the questions you have will likely be answered in
the owner's manual.
 Be sure to get to know and fully test the machine prior to the first use. Try cutting,
raking, and baling a small section of your field as practice, when there is no pressure to
get the hay crop in before a storm, etc. This is important because the machine is new
to you, and it will take some time to become accustomed to how the machine
operates. If your first use is during a live baling session and you run into problems,
there is a risk that the cut hay will be left in the field longer than desirable, and you risk
losing a good hay crop.
2020-1.3 IBEX EQUIPMENT CO