Xerox C310 Quick Reference Manual page 2

4. Insert the new toner cartridge.
5. Close door B.
L L o o a a d d i i n n g g t t r r a a y y s s
CAUTION—TIPPING HAZARD: To reduce the risk of
equipment instability, load each tray separately. Keep all
other trays closed until needed.
1. Remove the tray.
Note: To avoid paper jams, do not remove trays while the
printer is busy.
2. Adjust the guides to match the size of the paper that you are
loading.
Note: Use the indicators on the bottom of the tray to
position the guides.
3. Flex, fan, and align the paper edges before loading.
4. Load the paper stack with the printable side faceup, and then
make sure that the side guides fit snugly against the paper.
• Load letterhead faceup with the header toward the front of
the tray for one-sided printing.
• Load letterhead facedown with the header toward the back
of the tray for two-sided printing.
• Do not slide paper into the tray.
• To avoid paper jams, make sure that the stack height is
below the maximum paper fill indicator.
5. Insert the tray.
If necessary, set the paper size and paper type from the control
panel to match the paper loaded.
2