Canon Pixma iP4300 Series Quick Start Manual page 61

1
Make sure that the printer is turned on, and then remove any paper from the Auto
Sheet Feeder.
2
Press the Open Button to open the Paper Output Tray and extend the Output Tray
Extension.
3
Fold a single sheet of A4 or Letter-sized plain paper in half widthwise, and then
unfold the paper.
4
Load this and only this sheet of paper in the
Auto Sheet Feeder with the open side to the
front.
5
Open the printer properties dialog box.
6
Click the Maintenance tab, and then Bottom Plate Cleaning.
7
Follow the instructions displayed in the message.
The paper cleans the inside of the printer as it feeds through the printer.
If the ejected paper is smudged, clean the inside of the printer again.
If the problem is not resolved after performing cleaning twice, the protrusions inside the
printer may be stained. Clean them according to instructions. See "Cleaning the Protrusions
Inside the Printer" on page 59.
Routine Maintenance 57