Table of Contents
Advertisement
PROBLEM
A loud noise is heard from the earphones.
There is no video from the analog AV
connection.
If the TV is connected using HDMI cable,
there are no display on the LCD screen.
Pressing the LCD ON/OFF button after
connecting the player to a TV with an HDMI
cable does not display video on the LCD
monitor.
Video quality displayed on the product's LCD
becomes lower suddenly.
Earphone volume level is not saved.
Adjusting the volume control does not affect
volume produced from the TV.
Adjusting the volume control does not affect
volume produced from the earphones or
speakers.
Touch button does not operate.
Disc does not play.
Disc Menu does not appear.
•
Check whether the earphones are connected to the earphones jack
(
) properly. If they are connected to the AV jack (yellow), you cannot
hear sound normally.
•
Check whether the Audio/Video cable is properly connected to the AV jack
(yellow). If it is connected to the earphones jack, you cannot watch video or
hear sound normally.
•
The product automatically turns off its LCD screen when it detects an HDMI
connection to a TV. Press the LCD ON/OFF button of the remote control
to turn on the LCD screen. Note that LCD screen displays video in a lower
quality than that of no HDMI connection.
•
If the player is connected to a 3D supporting TV and is playing a 3D Blu-
ray disc, pressing the LCD ON/OFF button does not display video on the
product's LCD screen.
•
Check whether the product outputs video through an HDMI cable connected
to a TV. When displaying on a TV through an HDMI cable, the video quality
of the product's LCD is set to SD quality. To display video on the product's
LCD screen in a higher resolution, disconnect the HDMI cable connected to
a TV.
•
When you turn oftt the product with the volume level set to 10 or higher,
it automatically adjusts to 10 when turned back on. This is to protect your
hearing by avoiding too high volume level when the product is turned on.
•
The volume control wheel of the product only adjusts the volume level for
earphones and the built-in speakers. Use the TV volume control.
•
If an AV OUT or HDMI cable is connected, the volume control wheel does
not operate.
•
Check whether the HOLD switch on the front side of the product is set to
"LOCK" (
).
•
To enable touch button operation, slide the HOLD switch to "UNLOCK"
(
).
•
Ensure that the disc is installed with the label side facing up.
•
Check the region number of the Blu-ray Disc/DVD.
•
Ensure that the disc has disc menus.
SOLUTION
English
73
Hide quick links:
Advertisement
Table of Contents
