Resolution According To The Output Mode - Samsung BD-C8000 User Manual

Setup

Resolution according to the output mode

Output
Setting
Auto
1080p, Movie Frame(24Fs) off
1080p/1080i,
Movie Frame(24Fs) on
1080i, Movie Frame(24Fs) off
720p
480p
✎
NOTE
▪
If the connected TV does not support Movie Frame or
the selected resolution, the message "If no pictures
are shown after the selection, please wait for 15
seconds. And then, the resolution will be reverted to
the previous value automatically. Would you like to
make a selection?" appears.
If you select Yes and the resolution is not supported,
the TV's screen will be blank. Please wait for 15
seconds and the resolution will revert to the previous
value automatically.
▪
If the screen is blank, press and hold the STOP ()
button on the front of the product for more than 5
seconds (no disc inserted). All settings are restored
to the factory default. Follow the steps on the
previous page to access each mode and select the
Display Setup that your TV will support.
38
English
HDMI is Connected
Built-In LCD
Automatically set to
optimal resolution.
Automatically turned
off (If user press"LCD
ON/OFF" button on the
remote control,then
Standard Definition
Picture will be
displayed.
HDMI out AV out
480i
1080p@60Hz 480i
1080p@24Hz 480i
1080i 480i
720p 480i
480p 480i
▪
When the factory default settings are restored, all
stored user BD data is deleted.
▪
The Blu-ray Disc must have the 24 frame feature to
use the Movie Frame (24Fs) mode.
HDMI is not Connected
Built-In LCD AV out
480i
480i
480i
Resolution is fixed
internally as High
Resolution.
480i
480i
480i